RE: [IBIS] [GND_CLAMP] and [POWER_CLAMP] measurement for LVDS differential buffer

From: Muranyi, Arpad <arpad.muranyi_at_.....>
Date: Wed Sep 13 2006 - 22:14:25 PDT
Pretty much so.
 
Arpad
================

________________________________

From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org] On Behalf Of Yu-Shen Yang
Sent: Wednesday, September 13, 2006 4:06 PM
To: ibis@server.eda.org
Subject: [IBIS] [GND_CLAMP] and [POWER_CLAMP] measurement for LVDS differential buffer


Hi All,

In cookbook 4.0. the measurement setup for pullup and pulldown IV-Curve have been described.
My question is that is  GND_CLAMP and  POWER_CLAMP followed by the same method?
and the difference is to  disable the buffer ? Thanks


Yu-Shen Yang


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Wed Sep 13 22:15:23 2006

This archive was generated by hypermail 2.1.8 : Wed Sep 13 2006 - 22:15:39 PDT