RE: [IBIS-Users] 5V tollerant pad


Subject: RE: [IBIS-Users] 5V tollerant pad
From: Aubrey_Sparkman@Dell.com
Date: Tue Jan 28 2003 - 09:50:28 PST


Answer is yes. Use the Model Selector switch. But do you need to?

I thought 5V tolerant meant that the input of a chip with 3.3Vcc would not
be damaged by a 5 volt signal.

Aubrey Sparkman
Signal Integrity
Aubrey_Sparkman@Dell.com
(512) 723-3592

> -----Original Message-----
> From: garry.felker@conexant.com [mailto:garry.felker@conexant.com]
> Sent: Tuesday, January 28, 2003 10:52 AM
> To: ibis-users@eda.org
> Subject: [IBIS-Users] 5V tollerant pad
>
>
> Hi all,
> I have a 3.3V I/O pad that is 5V tollerant. I would like to
> include Rising
> and Falling waveform data with voltage rails at 3.6 and 5.5 V.
> Is there a way to include both of these conditions in the IBIS model?
> Garry Felker
>
>
>
> |------------------------------------------------------------------
> |For help or to subscribe/unsubscribe, email majordomo@eda.org
> |with just the appropriate command message(s) in the body:
> |
> | help
> | subscribe ibis <optional e-mail address, if different>
> | subscribe ibis-users <optional e-mail address, if different>
> | unsubscribe ibis <optional e-mail address, if different>
> | unsubscribe ibis-users <optional e-mail address, if different>
> |
> |or email a written request to ibis-request@eda.org.
> |
> |IBIS reflector archives exist under:
> |
> | http://www.eda.org/pub/ibis/email_archive/ Recent
> | http://www.eda.org/pub/ibis/users_archive/ Recent
> | http://www.eda.org/pub/ibis/email/ E-mail since 1993
>

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993



This archive was generated by hypermail 2b28 : Tue Jan 28 2003 - 10:02:18 PST