[IBIS-Users] Warning - "Typical value never becomes zero"

Hi ,

I have developed the IBIS model using s2ibis3 and I am using IBIS version 3.2

When I compile the .ibs file, I get the following warning  :

WARNING -
    Model MODEL1: POWER Clamp : Typical value never becomes zero
WARNING -
    Model MODEL1: POWER Clamp : Minimum value never becomes zero
WARNING -
    Model MODEL1: POWER Clamp : Maximum value never becomes zero


On looking at the Power clamp data, the current values that I get at 0.0V are :
0.3193mA      72.3000uA      0.6643mA
for typ,min and max respectively.

Can anyone elaborate on this warning ?

And how serious is this ?


Cheers ,

Vivek





|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993