RE: [IBIS-Users] Per-Pin Distributed RLC Support

From: Beal, Weston <weston_beal_at_.....>
Date: Tue Oct 25 2005 - 09:38:09 PDT
Ray,
 
ICX has supported the distributed package model for many years (except
the Fork and Endfork parameters). I remember in the "old days" using ICX
to simulate busses that included the Intel model that Michael mentioned
along with other Intel models. It seems that there were only a few other
models besides the Intel chipsets that used these distributed package
models.
 
Later,
Weston
 

________________________________

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On
Behalf Of Mirmak, Michael
Sent: Tuesday, October 25, 2005 9:06 AM
To: Ray Anderson; ibis-users@eda.org
Subject: RE: [IBIS-Users] Per-Pin Distributed RLC Support


Ray,
 
Intel Corp. has issued distributed RLC information in IBIS customer
models in the past.  An example of this would be the Intel ICH3 I/O Hub.
The model is available under NDA.
 
- Michael Mirmak

________________________________

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On
Behalf Of Ray Anderson
Sent: Monday, October 17, 2005 4:14 PM
To: ibis-users@eda.org
Cc: Ray Anderson
Subject: [IBIS-Users] Per-Pin Distributed RLC Support



In reviewing a large sampling of IBIS models from numerous vendors I
have yet to find any that implement the distributed RLC format as
described in the [Pin Numbers] section of the IBIS spec. (pages 117-120
in the 4.1 spec)

 

I was wondering if anyone is aware of any published models that take
advantage of this method of describing package parasitics.

 

Regards,

 

-Ray

 

 

Raymond Anderson

Senior Signal Integrity Staff Engineer

Product Technology Department

Advanced Package R&D

Xilinx Inc.

 

 


|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Tue Oct 25 09:38:15 2005

This archive was generated by hypermail 2.1.8 : Tue Oct 25 2005 - 09:39:14 PDT