Hi, I came across a model with numerous warnings as bellow: "Extreme currents present in MIN GND_Clamp VI Curve (-16.08A @ -1.5V)" and "Warning: Current (0.2251) of summed typical power and ground clamp curves exceed 0.005 amps in the range between power and ground." What's the best way to fix these? thank you Robert The information contained in this e-mail message is PRIVATE. It may contain confidential information and may be legally privileged. It is intended for the exclusive use of the addressee(s). If you are not the intended recipient, you are hereby notified that any dissemination, distribution or reproduction of this communication is strictly prohibited. If the intended recipient(s) cannot be reached or if a transmission problem has occurred, please notify the sender immediately by return e-mail and destroy all copies of this message. Thank you. |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993Received on Mon Dec 12 09:11:22 2005
This archive was generated by hypermail 2.1.8 : Mon Dec 12 2005 - 09:13:46 PST