Hi All, I was trying generate IBIS model for async SRAM. I used the HSPICE netlist for generating the IBIS model. While doing so I encountered an java exception(shown in pdf) while collecting .out files of Rising and falling waveforms . The .out files for rising and falling waveforms have been generated but the s2ibis3 (1.1 version) tool was not able to collect it. I have attached the error which I encountered in .pdf . I think probably this could be a bug in the tool. Could you please let me know the corrective action for this error? Also how could I get higher versions of S2ibis3 1.2 ,1.3 if any in which there are no bugs? Also could you please let me know how does the s2ibis3 tool calculates the value of ramp rate from rdn1.out,run1.out files etc? Looking forward to your reply. Thanks, Ramesh -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2.1.8 : Wed Mar 25 2009 - 08:58:50 PDT