RE: new ibischk3 V3.2.6

Syed,

This looks to be the implementation of BUG47, which flags extreme (greater
than 10%) IV-to-VT mismatches as errors instead of merely warnings. See the
BUG47 filing for details.

- Michael Mirmak, Intel Corp.

-----Original Message-----
From: Syed Huq [mailto:shuq@cisco.com]
Sent: Tuesday, January 09, 2001 4:49 PM
To: ibis-users@eda.org
Subject: new ibischk3 V3.2.6

I ran a model with the NEW ibischk3 ver3.2.6 and get this:

new version:
ERROR - Model XYZ_IO: The [Rising Waveform]
      with [R_fixture]=50 Ohms and [V_fixture]=2.5V
      has TYP column DC endpoints of 0.41V and 2.50v, but
      an equivalent load applied to the model's I-V tables yields
      different voltages (-0.70V and 2.50V),

In the earlier version(V3.2.5),this would show up as a WARNING. Since now
it shows up as ERROR, the file fails.

old version:
WARNING - Model 'XYZ_IO': TYP AC Rising Endpoints ( 0.41V, 2.50V) not
within
          0.042V (2%) of (-0.70V, 2.50V) on VI curves for 50 Ohms to 2.5V

Why was this changed to ERROR ?

Syed

 
Received on Tue Jan 9 17:26:47 2001