RE: Ramp data and rising & falling curves

I'd need to see the IV data but I will guess the Current in the pull up and
pull down tables was zero.

Tom Dagostino
Modeling Manager
Mentor Graphics Corp.
SAE
tom_dagostino@mentor.com
503-685-1613

-----Original Message-----
From: Paul J. Menchini [mailto:mench@mench.com]
Sent: Wednesday, May 23, 2001 10:47 AM
To: ibis-users@eda.org
Subject: Fwd: Ramp data and rising & falling curves

Hello Ibis Users,

This message is being redelivered as it failed when first sent.

Please contact the eda.org support staff at support@eda.org if
additional support is required.

Paul Menchini
Lead System Manager

Forwarded message:
> Received: from plexus-g.actel.com (plexus-g.actel.com [204.33.72.40])
> by server.eda.org (8.12.0.Beta7/8.12.0.Beta7) with ESMTP id
f4N05ZwL011475
> for <ibis-users@eda.org>; Tue, 22 May 2001 17:05:36 -0700 (PDT)
> Received: from sv-gw-02.amer.actel.com (sv-gw-02 [190.9.12.13])
> by plexus-g.actel.com (Pro-8.9.3/Pro-8.9.3/Actel_hub) with ESMTP id
RAA08717
> for <ibis-users@eda.org>; Tue, 22 May 2001 17:04:52 -0700 (PDT)
> Received: by sv-gw-02.amer.actel.com with Internet Mail Service
(5.5.2653.19)
> id <J2KWJB2W>; Tue, 22 May 2001 17:04:57 -0700
> Message-ID:
<0C3D45928631D5118B2B00805FEA496733D712@sv-msg-01.amer.actel.com>
> From: "Mohan, Prabhu" <Prabhu.Mohan@actel.com>
> To: "'ibis-users@eda.org'" <ibis-users@eda.org>
> Subject: Ramp data and rising & falling curves
> Date: Tue, 22 May 2001 17:04:50 -0700
> MIME-Version: 1.0
> X-Mailer: Internet Mail Service (5.5.2653.19)
> Content-Type: text/plain

> Hello,

> I'm using s2ibis to generate ibis models and I'm new to IBIS.
> The ramp data and all the rising & falling curves look like this. There
were
> no errors or aborted simulations. All the .out files seem to have all the
> datapoints.
> The pull-up, pull-down, power & ground clamp curves seem to be fine.
> Where am I going wrong?

> Thanks
> Prabhu

> [Ramp]
> | variable typ min max
> dV/dt_r -2.470e-21/0.000 -3.257e-21/0.000 -1.816e-21/0.000
> dV/dt_f 2.470e-21/0.000 3.257e-21/0.000 1.816e-21/0.000
> R_load = 50.0000
> |
> [Rising Waveform]
> R_fixture = 50.0000
> V_fixture = 3.3000
> V_fixture_min = 3.0000
> V_fixture_max = 3.6000
> | time V(typ) V(min) V(max)
> |
> 0.000S NA NA NA
> 0.000S NA NA NA
> 0.000S NA NA NA
> 0.000S NA NA NA
> 0.000S NA NA NA
> 0.000S NA NA NA
> 0.000S NA NA NA

> ...

> :-)
> Prabhu Mohan
> Product Engineer
> Actel Corp.
> 408.522.4412 - work

 
Received on Wed May 23 13:39:30 2001