Subject: [IBIS-Users] FW: IBIS model question
From: John Angulo (jangulo@innoveda.com)
Date: Fri May 17 2002 - 16:38:05 PDT
I'm forwarding the following post as it was erroneously bounced from the
list. Send private replies to whiz kid <we_r_frendz@yahoo.com>:
Hi Guys,
I have an IBIS model which has a built in Sub model.
The sub model is Non Driving. In the gnd clamp section
after the main Gnd clamp curves its listed as [Sub
Model Type] Dynamic Clamp and then the dynamic gnd
clamp values. My question is gurus, when initially the
sub model is Non driving what is the Use of the
Dynamic Gnd clamp. I would really appreciate any
information as to what exactly this means.
Thanks,
Rahul.
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Sat May 18 2002 - 10:40:53 PDT