Subject: Re: [IBIS-Users] FW: IBIS model question
From: Ross, Bob (bob_ross@mentorg.com)
Date: Wed May 22 2002 - 11:35:07 PDT
Rahul:
A brief answer is that the Dynamic Clamp can still be used
for an input model for several reasons:
1. The dynamic voltage shifting may model the behavior
of an input buffer that has the clamp reference triggered
by a voltage and that changes with time.
2. Or in a static mode, the Input mode of an I/O buffer may
contain the clamp, but it is switched out during the
driving mode.
3. The dynamic clamp in static mode can also be used for
an internal (on die) terminator that is switched in only
for the Input mode of an I/O buffer.
Bob Ross
Mentor Graphics
John Angulo wrote:
>
> I'm forwarding the following post as it was erroneously bounced from the
> list. Send private replies to whiz kid <we_r_frendz@yahoo.com>:
>
> Hi Guys,
> I have an IBIS model which has a built in Sub model.
> The sub model is Non Driving. In the gnd clamp section
> after the main Gnd clamp curves its listed as [Sub
> Model Type] Dynamic Clamp and then the dynamic gnd
> clamp values. My question is gurus, when initially the
> sub model is Non driving what is the Use of the
> Dynamic Gnd clamp. I would really appreciate any
> information as to what exactly this means.
>
> Thanks,
> Rahul.
>
> |------------------------------------------------------------------
> |For help or to subscribe/unsubscribe, email majordomo@eda.org
> |with just the appropriate command message(s) in the body:
> |
> | help
> | subscribe ibis <optional e-mail address, if different>
> | subscribe ibis-users <optional e-mail address, if different>
> | unsubscribe ibis <optional e-mail address, if different>
> | unsubscribe ibis-users <optional e-mail address, if different>
> |
> |or email a written request to ibis-request@eda.org.
> |
> |IBIS reflector archives exist under:
> |
> | http://www.eda.org/pub/ibis/email_archive/ Recent
> | http://www.eda.org/pub/ibis/users_archive/ Recent
> | http://www.eda.org/pub/ibis/email/ E-mail since 1993
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Wed May 22 2002 - 11:59:06 PDT