[IBIS-Users] for the minimum and maximum data

Subject: [IBIS-Users] for the minimum and maximum data
From: Allen Chao (achao@synopsys.com)
Date: Mon Aug 11 2003 - 07:42:02 PDT

• Next message: Lynne Green: "RE: [IBIS-Users] pullup/pulldown range LVDS"
• Previous message: erik.van.der.ven@philips.com: "[IBIS-Users] pullup/pulldown range LVDS"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi IBIS experts,
For the minimum and maximum datas, do we only consider the temperature and
the voltage source (90% to 110%)? or we should consider the slow/fast
corners for the resistors and mos transistors if we have those libraries
available?

Thanks in advance,

Allen

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993

• Next message: Lynne Green: "RE: [IBIS-Users] pullup/pulldown range LVDS"
• Previous message: erik.van.der.ven@philips.com: "[IBIS-Users] pullup/pulldown range LVDS"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b28 : Mon Aug 11 2003 - 07:43:46 PDT