RE: [IBIS-Users] IV Curves

Hello, Lee,
Please see answers inserted.
- Lynne

-----Original Message-----
From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf
Of lee yang
Sent: Sunday, January 09, 2005 5:58 PM
To: ibis-users@eda.org
Subject: [IBIS-Users] IV Curves

Hi IBIS experts:

I have a few questions regarding IBIS data:
1) What is the reason of ground clamp and pulldown data is ground relative
while power clamp and pullup data is vcc relative?
-- This was an arbitrary decision made in the IBIS 1.0 specification.
Note that GND-and Pulldown tables currents shift relative to ground
(and currents usually go through 0A at GND), while Power- and Pullup tables
shift when Vcc changes (and currents usually go through 0A at Vcc).

2) The IV curves data is covered from -vcc to 2vcc, in what condition the
voltage would become -vcc? (eg1: output is driving vcc and the receiver end
is being shorted, the reflection coefficient is -1, then the maximum
negative voltage is 0V (vcc + (-1*vcc)=0); eg2: output is driving 0v and the

reciever end is being shorted, the reflection coefficient is -1 as well,
would it be any reflection if the output is driving 0V with reciever end
being shorted to ground?)
-- A load with a small capacitance has a reflection coefficient close to +1.
For an open circuit termination, the reflection coefficient is +1.
A rising waveform into an "open circuit" load can cause 2*Vcc at the driver,
and a falling reflection (starting at Vcc) can cause -Vcc at the driver.

Hope you all could shed some light here.
Thanks.

Yours Faithfully,
LY

_________________________________________________________________
Find answers fast with MSN Search BETA. http://beta.search.msn.com.my/ New
look and improved results. Give it a try!

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
Received on Mon Jan 10 08:43:36 2005