Hi , I have developed the IBIS model using s2ibis3 and I am using IBIS version 3.2 When I compile the .ibs file, I get the following warning : WARNING - Model MODEL1: POWER Clamp : Typical value never becomes zero WARNING - Model MODEL1: POWER Clamp : Minimum value never becomes zero WARNING - Model MODEL1: POWER Clamp : Maximum value never becomes zero On looking at the Power clamp data, the current values that I get at 0.0V are : 0.3193mA 72.3000uA 0.6643mA for typ,min and max respectively. Can anyone elaborate on this warning ? And how serious is this ? Cheers , Vivek |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993Received on Mon Jul 11 05:10:42 2005
This archive was generated by hypermail 2.1.8 : Mon Jul 11 2005 - 05:12:20 PDT