Hi ibis experts! Is it possible to include s-parameter definition for a package into an IBIS model, or it is necessary to have the lumped RLC equivalent? So far we have only available the s-parameters model for the package, but we don't know how to include this info into the IBIS model... We will really appreciate your feedback regarding this point. Thanks in advance!!! Best Regards: Esdras -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Wed Jun 25 08:51:01 2008
This archive was generated by hypermail 2.1.8 : Wed Jun 25 2008 - 08:51:36 PDT