Check out the "Series_switch" model type. Arpad ========================================= ________________________________ From: owner-ibis-users@server.eda.org [mailto:owner-ibis-users@server.eda.org] On Behalf Of Estella Silva Sent: Monday, August 04, 2008 11:26 AM To: ibis-users@server.eda.org; ibis@server.eda.org Subject: [IBIS-Users] IBIS models for Relays Hello. Can anyone advise on how to create IBIS models for relays? Thanks & best regards, Estella ________________________________ -- This message has been scanned for viruses and dangerous content by MailScanner <http://www.mailscanner.info/> , and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner <http://www.mailscanner.info/> , and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Mon Aug 4 09:45:09 2008
This archive was generated by hypermail 2.1.8 : Mon Aug 04 2008 - 09:45:20 PDT