Hello ibis experts, I am into the IBIS modelling of a differential buffer. Some of the models available on web are simply using [Diff Pin]. while some of the differential drivers use [Series Pin Mapping] with any Series [Model]. Can you please explain that a series model is required or not and if required on what basis it is chosen (RSeries or CSeries or Series Mosfet or Series Current, which one to take). I went through some pdf's but I am looking for more elaborate explanation of this topic. PLease help. Regards, Vaibhav -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Mon Aug 4 22:38:39 2008
This archive was generated by hypermail 2.1.8 : Mon Aug 04 2008 - 22:39:22 PDT