Forwarded for Lance Wang. Bob --- Anders, You can use one EBD model and two IBIS models with packages. EBD model is just for the connections of the pins. Inside EBD you can refer to these two IBIS models which also contain package info. Also, try to use EBD as for connections only. It would eliminate its disadvantages. Send me an email directly if you need more helps. Regards Lance Wang IO Methodology Inc. 978-764-2298 lwang@iometh.com -- Bob Ross Teraspeed Consulting Group LLC Teraspeed Labs 121 North River Drive 13610 SW Harness Lane Narragansett, RI 02882 Beaverton, OR 97008 401-284-1827 503-430-1065 http://www.teraspeed.com 503-246-8048 Direct bob@teraspeed.com Teraspeed is a registered service mark of Teraspeed Consulting Group LLC -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Wed Jun 13 10:28:32 2007
This archive was generated by hypermail 2.1.8 : Wed Jun 13 2007 - 10:29:32 PDT