Vishrant, You can use the IBIS "Terminator" [Model] type to model that. Arpad ============================================ -----Original Message----- From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org] On Behalf Of Vishrant GOYAL Sent: Thursday, December 13, 2007 12:46 AM To: ibis@server.eda-stds.org Cc: vishrant.goyal@st.com Subject: [IBIS] ESD pad (ANA) IBIS model Hello expert, I have an IBIS model of USB PHY (ANA pad is not connected during development), now I want to develop top IBIS which is having USB PHY connected with ANA pad (ANA pad has only ESD diode protection). So how could I develop standalone IBIS model of ANA pad, which has only ESD protection circuit. Is it possible?? If yes then which parameters and curves I need to extract for ANA pad IBIS model. Thanks & Regards, Vishrant GOYAL -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Thu Dec 13 08:18:45 2007
This archive was generated by hypermail 2.1.8 : Thu Dec 13 2007 - 08:19:31 PST