RE: [IBIS] spice2IBIS

From: Mike LaBonte (milabont) <milabont_at_.....>
Date: Fri Jun 27 2008 - 08:36:32 PDT
I will not recommend a particular IBIS creation tool, but can say that
they are generally found as offerings from the companies who produce
IBIS simulators.
 
As for s2ibis3, notable shortcomings are that it does not calculate
C_comp and it will "double count" on-die termination currents by placing
them in both the [Ground Clamp] and [Power Clamp] curves. Converting
differential output buffers will require some manual intervention. The
commercial tools tend to take away the pain of these issues.
 
One consideration: buffer models that require clocked initialization
sequences are increasingly common, and nearly impossible to convert with
s2ibis3. But I'm not sure how well any available tools handle these,
since the tools tend to use DC analysis to extract I/V curves and those
buffer models simply do not work in a DC analysis. I have in the past
resorted to rewriting s2ibis2 to use transient analysis instead of DC
analysis for I/V curves. It is possible that some other tools may have
also done this.
 
Unfortunately I find myself having to generalize about all of this. You
would have to contact the various vendors to get the specifics.
 
Mike

________________________________

From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org] On
Behalf Of Babid A
Sent: Thursday, June 26, 2008 7:49 PM
To: ibis-users@server.eda.org; ibis@server.eda.org
Subject: [IBIS] spice2IBIS


Hello,

 

I am new to creating IBIS models, I am planning to use s2ibis3 tool from
north carolina university for IBIS model creation for the single ended
buffers. Is there any limitations with this free tool? What is the best
tool for creating IBIS models.?

 

-Thanks,



-- 
This message has been scanned for viruses and 
dangerous content by MailScanner <http://www.mailscanner.info/> , and is

believed to be clean. 

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Fri Jun 27 08:38:14 2008

This archive was generated by hypermail 2.1.8 : Fri Jun 27 2008 - 08:39:06 PDT