[IBIS] An IBIS-ISS spec question

Hello everyone,

I hope the IBIS Summit is going well in Asia...

I was trying to read what our IBIS-ISS spec says about
global nodes and parameters, and I did find the definitions
on the latter on pg. 26, but I can't find anything like that
on global nodes in the document.

As far as I remember, we did have rules in our drafts about
global nodes not being supported or not being visible inside
the IBIS-ISS subcircuits, but I can't find anything about
this in the document now. Please let me know if I am missing
something, but if this fell out of the document for some
reason, I believe we should add it back as soon as possible.

What is our IBIS-ISS "BIRD" process to document such spec
change requests?

Thanks,

Arpad
===============================================================

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993