Thanks to the authors of this BIRD for the quick actions. I would like to request that the following sentence be corrected, because it is grammatically incorrect, and because of that not clear (red emphasis added to point to the problem area): “…but the EDA Tool/Simulator may not change any inputs to AMI models or change other result of the simulation based on the values returned…” Thanks, Arpad ========================================================== From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Mirmak, Michael Sent: Tuesday, July 09, 2013 9:23 PM To: ibis@eda.org Subject: [IBIS] BIRD162: Change to Usage “Info, Out” for AMI Jitter and Noise Parameters BIRD162, Change to Usage “Info, Out” for AMI Jitter and Noise Parameters, has been posted on behalf of Bob Ross of Teraspeed Consulting Group, Walter Katz of Signal Integrity Software (SiSoft), and Fangyi Rao of Agilent Technologies. The text may be found at http://www.eda.org/ibis/birds/bird162.docx (the text is not attached here due to a reflector policy prohibition on attachments). The BIRD will be introduced at the next IBIS Open Forum teleconference. A complete list of BIRDs, including the status of each, is available at: http://www.eda.org/ibis/birds/ Michael Mirmak Intel Corp. Chair, IBIS Open Forum -- This message has been scanned for viruses and dangerous content by MailScanner<http://www.mailscanner.info/>, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org |or ibis-request@eda-stds.org | |IBIS reflector archives exist under: | | http://www.eda-stds.org/ibis/email_archive/ Recent | http://www.eda-stds.org/ibis/users_archive/ Recent | http://www.eda-stds.org/ibis/email/ E-mail since 1993Received on Wed Jul 10 11:52:01 2013
This archive was generated by hypermail 2.1.8 : Wed Jul 10 2013 - 11:52:40 PDT