[IBIS] RE: [IBIS] RE: BIRD162: Change to Usage "Info, Out" for AMI Jitter and Noise Parameters

Arpad:

 

Thanks for catching this.  The paragraph also contains a self-reference

to a BIRD.

 

I would reword the last clause from

 

Note:

The EDA Tool/Simulator shall use the values of these Jitter and Noise
parameters directly if they are Usage Info. If they are Usage Out, then the
EDA Tool/Simulator shall use their values generated by AMI_Init. The model's
AMI_GetWave function may return different values for these parameters than
the values returned by AMI_Init; the EDA Tool/Simulator may report the
values of such parameters to the user, but the EDA Tool/Simulator may not
change any inputs to AMI models or change other result of the simulation
based on the values returned for the parameters in this BIRD by AMI_GetWave.

 

 

To

 

Note:

The EDA Tool/Simulator shall use the values of the Jitter and Noise
parameters directly if they are Usage Info. If they are Usage Out, then the
EDA Tool/Simulator shall use their values generated by AMI_Init. The model's
AMI_GetWave function may return different values for these parameters than
the values returned by AMI_Init; the EDA Tool/Simulator may report the
values of such parameters to the user, but the EDA Tool/Simulator may not
change any input to AMI models or change any result of the simulation based
on the values returned for the Jitter and Noise parameters by AMI_GetWave.

 

 

Is this ok?

 

Bob

 

 

From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Muranyi,
Arpad
Sent: Wednesday, July 10, 2013 11:52 AM
To: ibis@eda.org
Subject: [IBIS] RE: BIRD162: Change to Usage "Info, Out" for AMI Jitter and
Noise Parameters

 

Thanks to the authors of this BIRD for the quick actions.

I would like to request that the following sentence be

corrected, because it is grammatically incorrect, and 

because of that not clear (red emphasis added to point

to the problem area):

 

".but the EDA Tool/Simulator may not change any inputs to AMI models or
change other result of the simulation based on the values returned."

 

Thanks,

 

Arpad

==========================================================

 

From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Mirmak,
Michael
Sent: Tuesday, July 09, 2013 9:23 PM
To: ibis@eda.org
Subject: [IBIS] BIRD162: Change to Usage "Info, Out" for AMI Jitter and
Noise Parameters

 

BIRD162, Change to Usage "Info, Out" for AMI Jitter and Noise Parameters,
has been posted on behalf of Bob Ross of Teraspeed Consulting Group, Walter
Katz of Signal Integrity Software (SiSoft), and Fangyi Rao of Agilent
Technologies.

 

The text may be found at http://www.eda.org/ibis/birds/bird162.docx (the
text is not attached here due to a reflector policy prohibition on
attachments). The BIRD will be introduced at the next IBIS Open Forum
teleconference.

 

A complete list of BIRDs, including the status of each, is available at:
http://www.eda.org/ibis/birds/  

 

      Michael Mirmak 

      Intel Corp. 

      Chair, IBIS Open Forum 

 


-- 
This message has been scanned for viruses and 
dangerous content by  <http://www.mailscanner.info/> MailScanner, and is 
believed to be clean. 


-- 
This message has been scanned for viruses and 
dangerous content by  <http://www.mailscanner.info/> MailScanner, and is 
believed to be clean. 


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.



--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org
|or ibis-request@eda-stds.org
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/ibis/email_archive/ Recent
|  http://www.eda-stds.org/ibis/users_archive/ Recent
|  http://www.eda-stds.org/ibis/email/         E-mail since 1993