[IBIS-Users] rising waveform

From: lau yy <tok47_at_.....>
Date: Thu Jul 07 2005 - 16:51:30 PDT
Dear ALL,
 
Can someone show me my mistake? The warning message like below.
 
WARNING - Model DQ0: The [Rising Waveform]
      with [R_fixture]=70 Ohms and [V_fixture_max]=3.1V
      has MAX column DC endpoints of  1.74V and  3.10v, but
      an equivalent load applied to the model's I-V tables yields
      different voltages ( 1.71V and  3.10V),
      a difference of  1.94% and  0.01%, respectively.
Thanks alot.
 
 
 
rdgs
yylau
|------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis | subscribe ibis-users | unsubscribe ibis | unsubscribe ibis-users | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993 Received on Thu Jul 7 16:51:33 2005

This archive was generated by hypermail 2.1.8 : Thu Jul 07 2005 - 16:53:39 PDT