RE: [IBIS-Users] IBIS Model Usage:

Lynne,

Strictly speaking only typical is REQUIRED in an

IBIS file...

Arpad

==================================================

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On
Behalf Of Lynne D. Green
Sent: Tuesday, May 10, 2011 2:13 PM
To: Muniswara Reddy Vorugu
Cc: 'ibis-users'
Subject: Re: [IBIS-Users] IBIS Model Usage:

Hello, Muniswara,

IBIS _requires_ all 3 corners in the SAME file, and IBIS-related tools
expect this. As Arpad noted, submodels can be used to model additional
corners. Separate models or files for the 3 corners might be useful for
other tools, but not for IBIS.

The IBIS Model Review Committee exists to help model makers. Files
should be checked with ibischk5 prior to submission.
http://www.eda.org/ibis/home/support/support.htm

Regards,
Lynne Green

Chair, IBIS Model Review Committee

On 5/9/2011 10:20 PM, Muniswara Reddy Vorugu wrote:

Hi,

For better delivery of IBIS model, we want to know better ways to get
usablility and manage our deliverables.

To make this balance, I want to understand the following:

1: What are the advantages of min/typ/max corners merged in single
file, over 3 files with one corner per file?

What is the difficulty for running Min/Typ/Max corners analysis.

Are there any Fundamental analysis limitations?

Regards,

Muniswara

-- IMPORTANT NOTICE: The contents of this email and any attachments are
confidential and may also be privileged. If you are not the intended
recipient, please notify the sender immediately and do not disclose the
contents to any other person, use it for any purpose, or store or copy
the information in any medium. Thank you.

-- 
This message has been scanned for viruses and 
dangerous content by MailScanner <http://www.mailscanner.info/> , and is
believed to be clean. 
-- 
This message has been scanned for viruses and 
dangerous content by MailScanner <http://www.mailscanner.info/> , and is
believed to be clean. 
-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993