[IBIS-Users] A newbie question

From: Lior Dagan <liord@mysticom.com>
Date: Tue Jul 26 2011 - 05:24:16 PDT

Hello all.

I am writing a model for my customers.

Their requirements are:

Use version 3.2.

2 Differential Open_sink pins.

Use the IBIS full component model (i.e, not a pin model but connect the
whole block).

Use Spectre.

The question is: How do I define for the instance it's input pins (that
stimulate the two open_sink pins)?

I have looked at both Cadence manuals and yours, and could not find an
answer..

Thanks,

 

Lior Dagan, CAD engineer @ TranSwitch

Cell: +972-52-3401068

 

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Tue Jul 26 05:26:07 2011

This archive was generated by hypermail 2.1.8 : Tue Jul 26 2011 - 05:26:53 PDT