[IBIS-Users] RE: A newbie question

Hi Lior Dagan,
Some companies in this page, put some models on web.
http://www.eda.org/ibis/home/models/models.htm

You could find some examples from this link.
http://www.maxim-ic.com/tools/ibis/index.cfm
http://www.national.com/en/interface/index.html#ibis
http://www.xilinx.com/support/download/index.htm

PS : These site for help, when I started. But do not know if they are alive.

Regards,
Muniswara

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf Of Lior Dagan
Sent: 26 July 2011 17:54
To: ibis-users@eda.org
Subject: [IBIS-Users] A newbie question

Hello all.
I am writing a model for my customers.
Their requirements are:
Use version 3.2.
2 Differential Open_sink pins.
Use the IBIS full component model (i.e, not a pin model but connect the whole block).
Use Spectre.
The question is: How do I define for the instance it's input pins (that stimulate the two open_sink pins)?
I have looked at both Cadence manuals and yours, and could not find an answer..
Thanks,

Lior Dagan, CAD engineer @ TranSwitch
Cell: +972-52-3401068

--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993