Ibis_model

Subject: Ibis_model
From: yoked erlich (yokede@motorola.com)
Date: Thu Sep 06 2001 - 08:13:40 PDT

Next message: Ross, Bob: "IBIS SUMMIT MEETING AGENDA 9/13/01"
Previous message: Guy de Burgh: "EIA IBIS Open Forum Meeting Minutes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi ,

I've got the next warning about [falling Waveform] simulation,

WARNING - Model ipad6wd: The [Falling Waveform]
      with [R_fixture]=50 Ohms and [V_fixture_min]=3V
      has MIN column DC endpoints of 1.29V and 3.00v, but
      an equivalent load applied to the model's I-V tables yields
      different voltages ( 1.27V and 2.94V),
      a difference of 1.64% and 2.18%, respectively.

I understood the first part of the warning , but I can't figure out how
does the checker find the second voltage range
(as it appear in the warning the range is yields from the I/V tables and
I couldn't find any sign to this voltage in I/V tables)

With regards,

Yoked.

_____________________________________ E-mail: yokede@motorola.com Tel: 972-9-9522482 Fax: 972-9-9522888 WIRELESS CIRCUIT - IO GROUP MOTOROLA SEMICONDUCTOR ISRAEL

text/x-vcard attachment: Card for yoked erlich

Next message: Ross, Bob: "IBIS SUMMIT MEETING AGENDA 9/13/01"
Previous message: Guy de Burgh: "EIA IBIS Open Forum Meeting Minutes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b28 : Thu Sep 06 2001 - 08:14:09 PDT