Hi IBIS Experts, One of my customer is getting the following warning in ICX parser. ;; ;; Warning: Current (0.306459) of summed typical power and ground clamp curves exceed 0.005 amps in the range between power and ground. ;; ;; Warning: Current (0.274468) of summed minimum power and ground clamp curves exceed 0.005 amps in the range between power and ground. ;; ;; Warning: Current (0.336667) of summed maximum power and ground clamp curves exceed 0.005 amps in the range between power and ground. While running ibischk4 I didnt get this warning. These warnings i am getting for LVDS input cell. Please also let me know what this warning means. Best Regards, Sudarshan HN NXP Semiconductors/CTO /PLT C-4, Manyata Tech Park, Nagawara Bangalore-560 045 , India. Ph:+91-80-40267073 Fax: +91-80-4026 7855 seri:sudarsha@inpsblr E-mail: sudarshan.honnudike@nxp.com -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Wed Mar 14 04:10:20 2007
This archive was generated by hypermail 2.1.8 : Wed Mar 14 2007 - 04:12:27 PDT