RE: [IBIS] C_comp value

Timmy,
 
You can do it either way, it depends on your needs.
If you want to correlate to your SPICE model, match
it to that, if you want to correlate to real life,
match it to your measurements.
 
Arpad
====================================================

________________________________

From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org] On Behalf Of Timmy Leon
Sent: Thursday, September 25, 2008 8:46 PM
To: ibis@server.eda.org
Cc: ibis-users@server.eda.org
Subject: [IBIS] C_comp value


Dear Sir/Madam,
 
I have a question regarding the c_comp value that we should put in IBIS model. Should the c_comp value be based on measurement, or can we tune value so that IBIS model correlate with its spice model or measurements? Thank you.
 
Best regards,
Timmy Leon


-- 
This message has been scanned for viruses and 
dangerous content by MailScanner <http://www.mailscanner.info/> , and is 
believed to be clean. 

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993