[IBIS] input signal for model usage

From: Fabio BRINA <fabio.brina_at_.....>
Date: Tue Mar 17 2009 - 03:24:31 PDT
Hello IBIS experts, 
 
 Once an IBIS model has been created, can be used in different Input speeds?
 
 In other words: if I consider an I/O model, Can I use every input Pulse
with
 several rise/fall time Or I have to use only the same pulse used in the 
 model creations?
 
I hope is clear what I mean.
 
Thanks,
Fabio
 
 

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.



--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Tue Mar 17 03:27:23 2009

This archive was generated by hypermail 2.1.8 : Tue Mar 17 2009 - 03:28:33 PDT