[IBIS] V-T data query

From: shantala hegde <h.shantala_at_.....>
Date: Mon Mar 23 2009 - 06:53:31 PDT
Hello all,

I do have one question VT data.
For example if I have an ibis model where [rising] data with voltage source
connected to VDDS is a fast one.But the one which is  connected to ground is
slow rising.

Say ,rising with vdds has 3ns and rising with ground connetced 10ns.

Is this normal scenario or is it mandatory to have approximately same V-T
end point for both rising/falling.

Regards,
Shantala

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Mon Mar 23 06:54:18 2009

This archive was generated by hypermail 2.1.8 : Mon Mar 23 2009 - 06:54:57 PDT