Shantala, As far as I remember, the IBIS specification doesn't requite that the V-t curves should have the same length. Arpad ========================================================= ________________________________ From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org] On Behalf Of shantala hegde Sent: Monday, March 23, 2009 8:54 AM To: ibis-users@server.eda.org; ibis@server.eda.org Subject: [IBIS] V-T data query Hello all, I do have one question VT data. For example if I have an ibis model where [rising] data with voltage source connected to VDDS is a fast one.But the one which is connected to ground is slow rising. Say ,rising with vdds has 3ns and rising with ground connetced 10ns. Is this normal scenario or is it mandatory to have approximately same V-T end point for both rising/falling. Regards, Shantala -- This message has been scanned for viruses and dangerous content by MailScanner <http://www.mailscanner.info/> , and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Mon Mar 23 07:39:05 2009
This archive was generated by hypermail 2.1.8 : Mon Mar 23 2009 - 07:40:33 PDT