[IBIS] RE: Question on AMI Standard

Hello,

That is just an example. You don't have to
use that number in your models...

Arpad
============================================

-----Original Message-----
From: Silva, Estella [mailto:Estella.Silva@nsc.com]
Sent: Thursday, December 16, 2010 4:58 PM
To: Muranyi, Arpad; ibis@eda.org; ibis-users@eda.org
Subject: Question on AMI Standard

Hi,

In Section Section 10 of version 5.0, Paragraph 3.1.2.4 sample_interval,

Can you please explain why sample_interval = (lowest_bit_time/64)
Why is "64" selected?

Thanks & best regards,
Estella

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993