Released Executables for ibischk7 Version 7.2.0

INTRODUCTION

The ibischk7 program is the official parser for versions of the IBIS specification from IBIS 2.0 through IBIS 7.2. Standalone executables are provided free of charge by the IBIS Open Forum. Contact ibischk@ibis.org for information or to report bugs. You must download these in a manner allowing you to run the executables with required command line arguments. No installer is provided.

Downloading any of the files below indicates your acceptance of the IBIS Binary Code License:

IBIS Binary Code License

Copyright 2020 IBIS Open Forum, SAE ITC

Redistribution and use in unmodified binary form only are permitted provided that
the following conditions are met:

1. Redistributions in binary form must reproduce the above copyright notice, this
   list of conditions and the following disclaimer in the documentation and/or
   other materials provided with the distribution.

2. Reverse engineering is prohibited.

3. Neither the name of the copyright holder nor the names of its contributors
   may be used to endorse or promote products derived from this software without
   specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

EXECUTABLES

Each link below will download a zip archive containing the selected executable(s) as well as the license agreement file, which must be copied along with the executables in any redistribution. Executables for ibischk7 are available for the following platforms:

• linux_redhat_64 (from Zuken)
• linux_ubuntu_32 (from Apt Software. Compiled on a system with GNU/Linux 3.2.0 kernel, for Ubuntu Linux systems)
• linux_ubuntu_64 (from Apt Software. Compiled on a system with GNU/Linux 3.2.0 kernel, for Ubuntu Linux systems)
• maca_64 (from Cadence Design Systems for Mac with Apple silicon)
• maci_64 (from Cadence Design Systems for Mac with Intel silicon))
• win_32 (from Apt Software for Windows operating systems)
• win_64 (from Apt Software for Windows operating systems)

The full set of executables is available in one ZIP archive ibischk720_all.zip. Some platform notes:

• Some differences might exist between the 32-bit and 64-bit compilations. For example, the "... equivalent load applied to the model's I-V tables ..." for W1503 calculates 1.42V on 64 bit systems and 1.43V on 32 bit systems for the same test case.
• When checking IBIS files with [Package Model] on Windows, ibischk7 may be unable to locate the .pkg files if the current working directory is on a UNC path. In that case, mapping the network path to a drive letter and running ibischk from the drive letter path is advised.

SHA1 digests are shown below for checking the integrity of each official release executable above. Unzip the contents of the ZIP file above and save the SHA1 checksum file ibischk720_sha1.txt (contents shown below). Then run "sha1sum -c ibischk720_sha1.txt". The report for each file should be "ok" (may need Unix, Linux, or Cygwin):

a4697cf8a81cdc5992f1d842001a40f860c3931a  linux_redhat_64/ibischk7_64
fffb228e9362420af869bb8624937a3641cc04bd  linux_ubuntu_32/ibischk7_32
2dc28ddd3660856917b346c12b971c44d95693ad  linux_ubuntu_64/ibischk7_64
f823f4ea19ced62442c1d2af72103559eb92cde5  maca_64/ibischk7_64
d65706fc3531acc47f761cb7ce63620c5f5133e1  maci_64/ibischk7_64
fed7975c0d1e8060e683501d5d88a893f2ed136a  win_32/ibischk7_32.exe
a1adb82c65a9e5fc2ccc9f797bf522a91e267152  win_64/ibischk7_64.exe

Previous Versions of ibischk7 executables exist under:

• old_v700
• old_v701
• old_v702
• old_v710
• old_v711

SOURCE CODE LICENSE

Contact the IBIS Chair if you need the source code. It is priced at $3,000.00. See the license terms below:

• IBISCHK7_PARSER_license.pdf - Source Code License

IBISCHK7 DOCUMENTATION

When “ibischk7” is run with no arguments, IBISCHK7 prints this help message:

IBISCHK7 V7.2.0

IBISfile validation:
This program has been provided free to the electrical
engineering community by the IBIS Open Forum.  The
purpose of this program is to validate that the contents
of ASCII device data in a file specified conform to the 
IBIS specification.
Usage: ibischk7_64       <IBS filename>
     : ibischk7_64  -ebd <EBD filename>
     : ibischk7_64  -pkg <PKG filename>
     : ibischk7_64  -ami <AMI filename>
     : ibischk7_64  -ims <IMS filename>
     : ibischk7_64  -ems <EMS filename>
     : ibischk7_64  -emd <EMD filename>
Usage: ibischk7_64  -caution -numbered      <IBS filename>
     : ibischk7_64  -caution -numbered -ebd <EBD filename>
     : ibischk7_64  -caution -numbered -pkg <PKG filename>
     : ibischk7_64  -caution -numbered -ami <AMI filename>
     : ibischk7_64  -caution -numbered -ims <IMS filename>
     : ibischk7_64  -caution -numbered -ems <EMS filename>
     : ibischk7_64  -caution -numbered -emd <EMD filename>
The flags prior to the file name can be in any order, and the -caution and/or -numbered flags are optional.

One (and only one) file name argument must be provided to perform checking, and the file name extension must be consistent with the file type flag. Independent .ebd, .emd, .pkg and .ami file checking is done using the -ebd, -emd, -pkg and -ami flags, respectively. The -caution flag produces additional Caution messages for all [IBIS Ver] versions. The -numbered flag produces Error, Warning, Notes, and Caution messages with four digit numbers following E, W, N, and C respectively.

IBISCHK7 MESSAGE DOCUMENTS (Work In Progress)

• ibischk_7.2.0_UserGuide_wip7.pdf - IBISCHK7 User Guide Version 7.2.0
• ibischk_7.2.0_messages_wip7.xlsx - Error Message Spreadsheet

IBISCHK7 BUGS AND ENHANCEMENTS

Version 7.2.0 of ibischk7 supports IBIS Version 7.2 and all prior versions. See the IBISCHK BUG page for full details on bug history, or to report a bug or enhancement.

The following BUG reports were closed in ibischk7 Version 7.0.0:

BUG205    Error Not Reported for IBIS-AMI with Illegal Usage Out and Format Corner

The following BUG reports were closed in ibischk7 Version 7.0.1:

BUG208    Missing Code Pointer Increment Causes [Interconnect Model Set] Test Case to Hang
BUG209    Correct E5801 and E5803 Error Messages for bus_label Tests

The following BUG reports were closed in ibischk7 Version 7.0.2:

BUG203    C_comp_* Tests for Input_* and Terminator Models
BUG204    Message for IBIS-AMI Rx_Receiver Sensitivity Negative Value
BUG206    No Message in [Series Switch Groups] for Missing On and Off function table group Entries
BUG210    [Model Selector] within [Component] Scope Issue
BUG211    Extreme Currents in Clamp Tables Report Modification
BUG212    Coding Error with Bit-wise Single '&' in imsmdl.c, Line 1371
BUG213    Unused_port_termination Not Correct for Interconnect Model File_TS

The following BUG reports were closed in ibischk7 Version 7.1.0:

BUG214    Connecting IBIS and Interconnect Models to IBIS-ISS
BUG215    Connecting IBIS and Interconnect Models to Touchstone
BUG217    [Algorithmic Model] Failure to Recognize Subdirectories
BUG218    Missing "else" in "if else" Line in hdr.c Impacting IBIS Ver
BUG219    Coding Error Due to Wrong Case in imsmdl.c
BUG220    No Error Reported forDuplicate [Interconnect Model Set]
BUG221    No Error for Missing [Begin Board Description]s in EBD or Missing [Interconnect Model Set]s in IMS
BUG222    No Errors for Space in [Interconnect Model Set] or [Interconnect Model] Names
BUG223    No Error for Duplicate [End Interconnect Model Set]
BUG224    No Warning for [Interconnect Model] with all Pins as Aggressor_Only
BUG226    No Error for Param Entry in [Interconnect Model] with File_TS

The following BUG reports were closed in ibischk7 Version 7.1.1:

BUG225    No Error for IBIS_AMI List_Tip Different Entries for Duplicate List Entries
BUG228    With EMD, Checking IBIS 2.0 Through IBIS 6.1 File to IBIS 7.0 Rules
BUG229    Code Fix for PKG file Error whan Stored in a Universal Network Path
BUG230    Bad Error Message with [Clock Pins] with [Model Selector], [Diff Pin] 
BUG231    B6801 and E6801 for Memory Overflow Issued in Two Different Code Locations
BUG232    Unexpected Errors with Absolute Links Using Embedded Source Code in [IBIS Ver] 7.0 or 7.1
BUG233    Parser Hangs with [Model Spec] Subparamenters and without Corresponding [Model] Subparameters
BUG234    No Error Reported for File Referenced with Absolute Path
BUG235    No Error in [C Comp Model] if Required C_comp_model_mode is Missing
BUG236    File_IBIS-ISS Error Message if Last Terminal of [C Comp Model] is Buffer_I/O
BUG237    Incorrect Arguments Produce No Error or Incorrect Errors for Rx_Use_Clock_Input
BUG238    Interconnect Models with Duplicate pin_names Incorrectly Produce Errors

The following BUG reports were closed in ibischk7 Version 7.2.0:

BUG240    Parser Crashes When [Interconnect Model Group] Name is Missing

Copyright © 2023
Last edited: May 2, 2023