Subject: [IBIS-Users] IBIS problem
From: akhilesh.chandra@st.com
Date: Sun Sep 15 2002 - 03:17:45 PDT
Hello,
I got one problem in my during ibischk
ERROR - Model BD2TARDQP_TC_40: The [Rising Waveform]
with [R_fixture]=50 Ohms and [V_fixture]=3.3V
has TYP column DC endpoints of 2.44V and 3.30v, but
an equivalent load applied to the model's I-V tables yields
different voltages ( 2.30V and 3.30V)
My cell's Rising Waveform have 2.44V & 3.30V dc end ponit but I am
unable to find out how IBISCHK got 2.30V & 3.30V DC end point.
Can anyone tell me please how IBISCHK got DC endpoint.
Regards
Akhilesh
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Sun Sep 15 2002 - 03:30:28 PDT