Subject: Re: [IBIS-Users] s2ibis2 validity
From: Syed Huq (shuq@cisco.com)
Date: Mon Sep 16 2002 - 08:46:52 PDT
Anshuli,
The reliability of the output data is based on how well the translation
setup was done. It is also based on the original SPICE models you are
trying to translate. After all, you are simply getting the V/I and V/T
output coming out of your spice simulation and formatting it to meet the
IBIS standard.
So, review the IBIS model and validate the model on a simulator.
Syed
>Date: Mon, 16 Sep 2002 14:41:49 +0530
>From: Anshuli Goel <anshuli@india.ti.com>
>X-Accept-Language: en
>MIME-Version: 1.0
>To: "ibis-users@eda.org" <ibis-users@eda.org>
>Subject: [IBIS-Users] s2ibis2 validity
>Content-Transfer-Encoding: 7bit
>
>Hi IBIS users
>
>I am generating the IBIS models using s2ibis2 utility. I wanted to know
>how much reliable is this utility in doing this and is there any way to
>validate the models obtained from this utility.
>
>Regards
>Anshuli
>
>
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Mon Sep 16 2002 - 09:09:03 PDT