[IBIS-Users] ibis question

Subject: [IBIS-Users] ibis question
From: Sivakumar S. - CTD, Chennai. (sivakumar@ctd.hcltech.com)
Date: Thu Jan 23 2003 - 21:49:14 PST

Next message: Peter LaFlamme: "Re: [IBIS-Users] ibis question"
Previous message: Lynne Green: "[IBIS-Users] Final Agenda, IBIS Summit Meeting"
Reply: Peter LaFlamme: "Re: [IBIS-Users] ibis question"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

IBIS Gurus,
I have a ibis model with the following inputs
INPUT1,INPUT2.When I compare these two inputs, there is no difference except
the [Voltage Range].I would like to know whether these will have similar
characteristics and behaviour or not?.Could anybody please give me some
explanation?.I have checked these two INPUTs in the hyperlynx ibis editor
and captured waveform and attached waveform for your reference.

And also in some IBIS models, I found that the input buffers are
defined with POWER_CLAMP and GND_CLAMP .But this model is having only
GND_CLAMP defined. What will be the effect? could anybody explain me?

[Model] INPUT1
Model_type Input
Vinl = 0.75v
Vinh = 1.75v
| variable typ min max
C_comp 2.0pF 1.5pF 2.5pF
|
|variable typ min max
[Temperature Range] 50 0 100
|
|variable typ min max
[Voltage Range] 2.5 2.375 2.7
|
[GND Clamp]
|voltage typ min max
0 0 NA NA
-0.3 0 NA NA
-0.4 -0.05m NA NA
-0.5 -0.5m NA NA
-0.55 -1.3m NA NA
-0.6 -2.6m NA NA
-0.65 -4.4m NA NA
-0.7 -6.8m NA NA
-0.75 -9.6m NA NA
-0.8 -13.7m NA NA
-0.9 -26.0m NA NA
-1.0 -42.5m NA NA
-1.2 -81.5m NA NA
-1.5 -145.1m NA NA
-1.8 -212.6m NA NA
-2.1 -279.1m NA NA
-2.4 -344.8m NA NA
-2.7 -415.5m NA NA
-3.0 -480.1m NA NA

[Model] INPUT2
Model_type Input
Vinl = 0.75v
Vinh = 1.75v
| variable typ min max
C_comp 2.0pF 1.5pF 2.5pF
|
|variable typ min max
[Temperature Range] 50 0 100
|
|variable typ min max
[Voltage Range] 3.3 3.135 3.6
|
[GND Clamp]
|voltage typ min max
0 0 NA NA
-0.3 0 NA NA
-0.4 -0.05m NA NA
-0.5 -0.5m NA NA
-0.55 -1.3m NA NA
-0.6 -2.6m NA NA
-0.65 -4.4m NA NA
-0.7 -6.8m NA NA
-0.75 -9.6m NA NA
-0.8 -13.7m NA NA
-0.9 -26.0m NA NA
-1.0 -42.5m NA NA
-1.2 -81.5m NA NA
-1.5 -145.1m NA NA
-1.8 -212.6m NA NA
-2.1 -279.1m NA NA
-2.4 -344.8m NA NA
-2.7 -415.5m NA NA
-3.0 -480.1m NA NA

Your comments are greatly appreciated.

regards
siva

application/octet-stream attachment: Model_INPUT2__3_3-_Ground_clamp.pdf

application/octet-stream attachment: Model_INPUT1__2_5-_Ground_clamp.pdf

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993

Next message: Peter LaFlamme: "Re: [IBIS-Users] ibis question"
Previous message: Lynne Green: "[IBIS-Users] Final Agenda, IBIS Summit Meeting"
Reply: Peter LaFlamme: "Re: [IBIS-Users] ibis question"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b28 : Thu Jan 23 2003 - 21:57:30 PST