Subject: [IBIS-Users] Temperature range for creating IBIS models
From: Anuj Chakrapani (aju@cypress.com)
Date: Wed Jul 02 2003 - 11:17:17 PDT
Hi:
I would like to know about the temperature range over which IBIS models are
generated. Do we generate the I-V tables over the ambient temperature range
(range specified in datasheets) or the junction temperature range (die
temperature). Since the two temperature ranges are different, I would
appreciate inputs from IBIS developers as well as from IBIS users, on what
their preference is.
Thanks,
-Anuj.
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Wed Jul 02 2003 - 11:22:33 PDT