[IBIS-Users] Output or I/O

From: Fabio BRINA <fabio.brina_at_.....>
Date: Mon Jan 30 2006 - 02:22:00 PST
Hi  IBIS experts,

I have a Buffer structure with an Output pin.
for some reason on this output pin is connected
a GND clamp diode.

Can I set [Model type] = I/O  to characterize also this diode?  
or  I  have to set  [Model type] = Output ?
In the first case  ( I/O type ) can I have I-V and V-t
maching problems?

many thanks

Best Regards,
Fabio

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Mon Jan 30 02:32:32 2006

This archive was generated by hypermail 2.1.8 : Mon Jan 30 2006 - 02:38:54 PST