Hi Sujit, Here are the seteps that I follow: 1- Run the IBIS simulator with loading conditions of the intenal wave forms in the model(usually resistive). 2- Run the SPICE netlist in the same loading condition and compare. If passedgo to next step. If not then, either the I-V or V-t curves arenot correct. 3- Repeat 1 & 2 on capacitive load only and compare. 4- Repeat 1 & 2 with a transmissin line with unmatched load that the refelected signal will hit the driver side at the middle of the rise time. Compare. P.S. Step 4 is a tough one but, it is the ultemate test. I got excellent corrolation before up to 3.125 GHz so, it is doable. Hazem On Tue, 26 Dec 2006 15:40:30 +0530 Sujit Kumar-r65837 <sujit@freescale.com> wrote: > hi IBIS users > I have generated the ibis model of an I/O pad. > Is there any way through which I can be sure that the >table generated is correct? > > In short, > I wanted to know that what sort of validation > procedure/technique > is done on any ibis model. > > -- > thanks > sujit kumar > > > > > +91-120-4396069 > +91-09910168788 > > Hazem Hegazy$IBIS modeling manager$Quality ___________________________________________________________________________ Your email is totally virus secure by MenaNet AntiVirus. Tired of spam? Get advanced, send spam emails to MenaNet.AntiSpam@menanet.net to be protected by MenaNet AntiSpam. http://www.menanet.net -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Tue Dec 26 04:25:37 2006
This archive was generated by hypermail 2.1.8 : Tue Dec 26 2006 - 04:26:24 PST