Sorry, I've never used the s2ibis2 script. Can anyone else on this list please help? Thanks, Randy ________________________________ From: Hung Ngo [mailto:hngo@atrua.com] Sent: Wednesday, May 30, 2007 4:27 PM To: rrwolff; ibis-users Subject: Need help with GND_Clamp and POWER_Clamp Hello Randy, I am a beginner at IBIS. I downloaded the free tools from IBIS homepage and try to generate the models for the first time. So far so good but the example script ( http://www.vhdl.org/pub/ibis/s2ibis/s2ibis2_v1.1/) does not include GND_clamp and POWER_clamp. Is there any other scripts or examples you can tell me so I can complete my IBIS models quickly? My question to you is: 1/ when I sweep the supply range for GND_clamp from -VDD to +VDD, should I tie the Pad to VSS or to VDD? 1/ when I sweep the supply range for POWER_clamp from -VDD to 0V, should I tie the Pad to VSS or to VDD? Your help is greatly appreciated. Thank you Randy. Hung Ngo Atrua Technologies 1696 Dell Avenue Campbell, CA 95008 (408) 370-8015 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2.1.8 : Wed May 30 2007 - 16:08:52 PDT