[IBIS-Users] Timing test load

Hello Experts,

For a Output buffer IBIS model, I have following type Timing test load 
setup.


 _________
|                   |
|               |\ |                      Rseries              Rref
|DRIVER|  \|---O----/\/\/\----O----/\/\/\---o Vref
|               |  /|                                    |
|               |/  |                                 --- Cref
|_________ |                                 ---
                                                        |
                                                        |
                                                   GND

Vref, Cref and Rref keywords are existing in IBIS spec. But how can I mention Rseries resistance as *TIMING TEST LOAD* in my IBIS model?


-- 

Thanks n Regards
Prabhat Ranjan



-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993