RE: [IBIS-Users] Timing test load

I am not sure you can.  The keyword [Test Load] may
let you do it with Rs_near and Rs_far, but I don't
see a Vmeas in this keyword, and its purpose is
slightly different (Golden Waveforms).
 
Arpad
====================================================

________________________________

From: owner-ibis-users@server.eda.org
[mailto:owner-ibis-users@server.eda.org] On Behalf Of Prabhat RANJAN
Sent: Monday, October 13, 2008 6:59 AM
To: ibis-users@server.eda.org
Cc: Prabhat RANJAN
Subject: [IBIS-Users] Timing test load


Hello Experts,

For a Output buffer IBIS model, I have following type Timing test load
setup.


 _________
|                   |
|               |\ |                      Rseries              Rref
|DRIVER|  \|---O----/\/\/\----O----/\/\/\---o Vref
|               |  /|                                    |
|               |/  |                                 --- Cref
|_________ |                                 ---
                                                        |
                                                        |
                                                   GND


Vref, Cref and Rref keywords are existing in IBIS spec. But how can I
mention Rseries resistance as TIMING TEST LOAD in my IBIS model?


-- 

Thanks n Regards
Prabhat Ranjan


-- 
This message has been scanned for viruses and 
dangerous content by MailScanner <http://www.mailscanner.info/> , and is

believed to be clean. 

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993