Gowtham Since time is relative in IBIS model simulations, what you do is to normalize the V/T table timing, by shifting the slower corner curves back towards zero. Essentially, you remove any leading static values from the curves, prior to the edge transitions. Scott Gowtham M wrote: > Hello, > > How do we ensure that IBIS model can be correctly simulated at the > highest possible frequency? Suppose, I have a buffer which is expected > to work at 100MHz. Hence, the VT table should be at most 1 / ( 2 * > 100M ) = 5ns wide. > > If the buffer is designed such that it can just meet this requirement > in min (slow) corner. The problem that I am facing is that I cannot > represent all of typ/min/max transitions within this window of 5ns > because of variations in buffer delay across corners. > > How do I create an IBIS model that can be correctly simulated at > 100MHz in such cases? > > Thanks for your help. > > Gowtham > -- Scott McMorrow Teraspeed Consulting Group LLC 121 North River Drive Narragansett, RI 02882 (401) 284-1827 Business (401) 284-1840 Fax http://www.teraspeed.com Teraspeed® is the registered service mark of Teraspeed Consulting Group LLC -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Mon May 18 08:18:32 2009
This archive was generated by hypermail 2.1.8 : Mon May 18 2009 - 08:18:52 PDT