[IBIS-Users] FW: C_comp calculation for high speed IOs

Forwarded on behalf of Ajay Kapoor...

From: ajay kapoor [mailto:akap.31@gmail.com]
Sent: Wednesday, March 10, 2010 4:34 PM
To: Mirmak, Michael
Subject: C_comp calculation for high speed IOs

[...]

I needed help on follwoing:
I am developing IBIS models for DDR3 IO with following condition that On Die Termination is turned ON and DDR3 is recieving data.
Can you please suggest a method / setup to calculate accurate Ccomp value for this model ?

Thanks in Advance
AK

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993