Thanx for the fast response.
Following is my two cents worth:
The output current is always a function of both the rail voltages.
So it is not enough if ibis specifies that both the v-i are referenced to the
most positive rail. There should be an explicit additional specification as to what the other rail voltage is. (Acutally I think in general explicit specification of both the rail voltages at the measurement point is always necessary).
- Kumar
Received on Mon Sep 13 06:56:56 1993
This archive was generated by hypermail 2.1.8 : Fri Jun 03 2011 - 09:52:28 PDT