[IBIS] IO Open Drain Model

From: gaurav Singh <gsin_at_.....>
Date: Fri Feb 13 2009 - 04:31:27 PST
Hi All,

I am working on generating an IBIS model for I2C lines. 

Could you please tell me which I-V tables should be included in the IBIS model for an IO-opendrain model? 

And also do we need to use any standard external pull-up resistance load in the netlist like 1K or 2.2K for rising waveforms ? Thanks in advance.

Thanks,
Gaurav


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Fri Feb 13 04:32:40 2009

This archive was generated by hypermail 2.1.8 : Fri Feb 13 2009 - 04:34:18 PST